This is the gauge used on the Fill Checkers, AC360 and AC365, as well as the Cylinder Equalizer AC366.

• Dual scale: 0 to 5000 psi and 0 to 350 bar

• 2.75 in (69.8 mm) diameter

• 1/4” male NPT thread

• Shock resistant housing

• For topside use only - do not submerge

• Gauge boot not included (p/n GP17)

This gauge boot is custom fitted for the GB01 HP Gauge. It is not included with the gauge. It is a separate add-on item.

• Protects the gauge from mild impact

• Silicone compound

• Includes hole in top for over-pressure plug

Note: Not intended for compressor use. Since it is not fluid-filled, the vibration of the compressor will cause the needle to bounce, making it difficult to read.

p/n
GB01 (HP Gauge)
GP17 (Gauge Boot)