HP Hose QD Adapter

  • Add to any pressure gauge, console or air integrated console which uses a standard high pressure hose
  • Remove your gauges for safe storage
  • Bayonet mount style quick-connect (push and turn)
  • Gauge attachment end has 7/16-20 female threads
  • Hose attachment end has 7/16-20
    male threads
  • Airspool with Viton o-rings included
  • Brass construction with black
    chrome finish

P/N AC383

1


1

"EZ" QD Adapter

  • Convert any standard regulator hose to a BC quick disconnect hose
  • Installs on the second stage end of a regulator hose
  • Six point attachment with six ball-bearings
  • "EZ" QD design, just push to attach - no need to pull back the collar
  • Wide easy grip collar
  • A favorite for drysuit inflation hoses
  • Chromed brass construction
  • Low pressure use only - below 200 psi
  • Factory cleaned - Viton o-rings

P/N AC900



"Oceanic Style" QD Adapter

  • Convert any standard regulator hose to a "Oceanic Style" QD hose
  • Installs to the second stage end of a regulator hose
  • Chromed brass construction
  • Low pressure use only - below 200 psi
  • Factory cleaned - Viton o-rings

    Compatible with:
    Oceanic Air XS, Aeris Air Link, Zeagle Octo Plus, Beauchat Venturi

P/N AC920



"SeaQuest Style" QD Adapter

  • Convert any standard regulator hose to a "SeaQuest Style" QD hose
  • Installs to the second stage end of a regulator hose
  • Chromed brass construction
  • Low pressure use only - below 200 psi
  • Factory cleaned - Viton o-rings

    Compatible with:
    SeaQuest Air Source, US Divers Air Mic

P/N AC925




"ScubaPro Style" QD Adapter

  • Convert any standard regulator hose to a "ScubaPro Style" QD hose
  • Installs to the second stage end of a regulator hose
  • Chromed brass construction
  • Factory cleaned - Viton o-rings
  • Compatible with:
    - Tusa Duo Air
    - ScubaPro Air 2
    - Atomic SS1
    - Sherwood Gemini

    - Zeagle Octo-Z

P/N AC930




Poseidon Hose Adapter

  • Convert any standard regulator hose to fit a Poseidon X-Stream second stage
  • Fits any Poseidon second stage with M31-1.5mm inlet threads
  • Brass construction with black chrome finish
  • Does not have a built-in relief valve
  • Low pressure use only - below 200 psi

P/N AC980

1

1

90º Right Angle Adapter

  • Make any primary regulator more comfortable while diving
  • Routes the hose under the right arm instead of over the shoulder
  • Often used on octopus to improve hose routing
  • Installs between the second stage and the regulator hose
  • Chromed brass construction
  • Low pressure use only - below 200 psi
  • Factory cleaned - Viton o-rings

P/N AC910




110º Adapter

  • Make any primary regulator more comfortable while diving
  • Routes the hose under the right arm instead of over the shoulder
  • Often used on octopus to improve hose routing
  • Installs between the second stage and the regulator hose
  • Chromed brass construction
  • Low pressure use only - below 200 psi
  • Factory cleaned - Viton o-rings

P/N AC911




90º Right Angle Adapter with Swivel

  • This is a combination of the AC910 and the AC912
  • Rotating swivel action at the end of a 90º adapter
  • Installs between low pressure regulator hose and second stage
  • Chromed brass construction
  • Low pressure use only - below 200 psi
  • Factory cleaned - Viton o-rings

P/N AC922


1

Brass Swivel Adapter

  • Increase comfort and reduce jaw fatigue
  • Rotating swivel action
  • Installs between low pressure regulator hose and second stage
  • Chromed brass construction
  • Low pressure use only - below 200 psi
  • Factory cleaned - Viton o-rings

P/N AC912


1

Stainless Steel
Swivel Adapter

  • This is the same designed as the AC912 though manufatured from stainless steel
  • Rotating swivel action
  • Installs between low pressure regulator hose and second stage
  • All stainless steel construction
  • Low pressure use only - below 200 psi
  • Factory cleaned - Viton o-rings

P/N AC921


1

Brass 2nd Stage Quick Disconnect

  • Add a quick-disconnect to most any regulator or full face mask
    • Installs between low pressure regulator hose and second stage
    • Lock-down screw to prevent accidental disconnection
    • Chromed brass construction
    • Low pressure use only - below 200 psi
    • Factory cleaned - Viton o-ring

P/N AC990

1
1

Brass 2nd Stage QD - Male Only

  • This is the male quick-disconnect of the AC990
  • Put these on multiple second stage regulator for quick swaps
  • Chromed brass construction
  • Low pressure only - below 200 psi
  • Factory cleaned - Viton o-ring

P/N AC991

1
1

Stainless 2nd Stage Quick Disconnect

  • Add a quick-disconnect to most any regulator or full face mask
  • Installs between low pressure regulator hose and second stage
  • Click & Lock to prevent accidental disconnection
  • Stainless Steel construction
  • Low pressure use only - below 200 psi
  • Factory cleaned - Viton o-ring

P/N AC992

1
1

Stainless 2nd Stage Quick Disconnect with Swivel

  • This is a combination of the AC992 and the AC921
  • Rotating swivel action at the end of a quick disconnect
  • Installs between low pressure regulator hose and second stage
  • Add a quick-disconnect to most any regulator or full face mask
  • All stainless steel construction
  • Click and lock to prevent accidental disconnection
  • Low pressure use only - below 200 psi
  • Factory cleaned - Viton o-ring

P/N AC993

1

Stainless 2nd Stage QD with Swivel - Male Only

  • This is the male quick-disconnect of the AC993
  • Add the rotating swivel feature to AC990 or AC992
  • All stainless steel construction
  • Low pressure use only - below 200 psi
  • Factory cleaned - Viton o-ring

P/N AC994

1
1

LP Port Adapter 1/2" Male to 3/8" Female

  • This adapter allows the connection of a standard low pressure regulator hose (3/8-24)
    into a large size regulator first stage low pressure port (1/2-20)
  • Brass construction with black chrome finish
  • Low pressure use only - below 200 psi
  • Factory cleaned - Viton o-ring

P/N AC940

1
1


LP Hose Adapter to
Male x Male

  • Convert standard low pressure regulator hose
  • So that both ends are male threads
  • Adapter changes second stage end of regulator hose to be the same as male end
  • Change 9/16 - 18 female to 3/8 - 24 male
  • Low pressure use only - below 200 psi
  • Factory cleaned - Viton o-ring

P/N AC919

1
1

Regulator Hose to Regulator Hose Connector

  • Connect two regulators together to make one longer hose
  • 3/8-24 female x 9/16-18 male
  • Low profile 11.5mm height
  • Brass construction with black chrome finish
  • Low pressure use only - below 200 psi
  • Factory cleaned

P/N AC960

1

1

Low Pressure Port Extender

  • Extend the placement of low pressure port away from first stage
  • 3/8-24 female x 3/8-24 male
  • 16 mm height
  • Brass construction with black chrome finish
  • Low pressure use only - below 200 psi
  • Factory cleaned - Viton o-ring

P/N AC970



SS Adapter 9/16-18 Male to 1/4" Male NPT

  • Change the second stage end of a regulator hose to 1/4" NPT male threads
  • 9/16-18 male to 1/4" male NPT
  • Stainless steel construction
  • Low pressure only - below 200 psi
  • Factory cleaned - Viton o-ring

P/N AC905



SS Adapter 3/8-24 Female to 1/4" Male NPT

  • Change the first stage end of a regulator hose to 1/4" NPT Male threads
  • 3/8-24 female to 1/4" Male NPT
  • Stainless steel construction
  • Low pressure only - below 200 psi

P/N AC915



Swivel LP Port Adapter
1 to 3 Ports

  • Increase the number of low pressure port on a first stage
  • Takes one low pressure to three low pressure ports
  • The bright chromed part swivels around the black chromed part
  • (1) 3/8-24 male inlet to (3) 3/8-24 female outlets
  • Chromed brass construction
  • Low pressure only - below 200 psi
  • Factory cleaned - Viton o-rings

P/N AC913

1

1


High Pressure Port Adapter

  • Add an additional high pressure port to your regulator's first stage
  • Additional port allows for 360º swivel
  • One 7/16-20 male to two 7/16-20 female outlets (common HP port)
  • Chromed brass construction
  • High pressure use - Maximum 5000 psi
  • Factory cleaned - Viton o-rings

P/N AC906

1

LP Hose Splitter

  • Attach to the second stage end of one low pressure regulator hose
    • Allows the attachment of two low pressure regulator hoses (first stage ends)
    • One 9/16-18 male inlet to two 3/8-24 female outlets
    • Chromed brass construction
    • Low pressure only - below 200 psi

P/N AC918




Male 1/4" NPT Adapter

  • Attach one end to a first stage low pressure port
  • The other end allows the attachment of a "industrial style" hose with 1/4" NPT female threads
  • 3/8-24 male to 1/4" male NPT
  • Brass construction with black chrome finish
  • Low pressure only - below 200 psi

P/N AC916



Female 1/4" NPT Adapter

  • Attach one end to the first stage end of a low pressure hose
  • The other end allows the attachment of a "industrial style" hose
    with 1/4" NPT female threads
  • 3/8-24 female to 1/4" male NPT
  • Brass construction with black chrome finish
  • Low pressure only - below 200 psi

P/N AC917



Plug Set - Delrin

  • Male plug - cap off and keep clean the second stage end of a low pressure regulator hose
  • Female plug - cap off and keep clean the inlet to a second stage
  • 9/16-18 threads
  • Includes both male and female plugs
  • Machined Delrin construction
  • Not to be used under pressure

P/N AC914

Everything for the Perfect Dive

Home | Product Guide | Dealer Locator | Contact Us
Company Profile | Support | Search | Dealers Only

©2014 XS Scuba. All rights reserved.