• Urethane coated 2" nylon webbing to prevent tank slipping
  • 316 grade stainless steel cam buckle
  • Highest quality real velcro brand hook and loop
  • Reinforced construction with box stitching and bar-tacks
PART NUMBER DESCRIPTION
HL204
Clinch Strap (pair)


  • We proudly manufacture Highland tank bands
  • 100% 316 stainless steel
  • 16 gauge with #4 finish
  • Fusion welds, passivated, polished
  • Stainless steel mounting hardware included
  • Center to Center = 8.46”
  • Hardware included
PART NUMBER DIAMETER WIDTH
SB725 7.25" diameter 2.5" Wide
SB800 8" diameter 2.5" Wide
SB803 8" diameter 3" Wide

  • Stainless Steel mounting hardware for Stainless Steel Cylinders
  • Bolt length for BK725 is 5"
  • Bolt lenght for BK800 is 5.5"
PART NUMBER DESCRIPTION
BK725 3/8" for 7.25" bands
BK800 5/16" for 8.00" bands


  • 316 stainless steel construction with #4 brushed finish
  • 6 lbs total weight
  • Angled and horizontal top “straight” or “cross-over” shoulder strap configuration
  • Twin mounting holes at 11” on center (bottom hole is slotted facilitate mounting)
  • “V” depth of 1” to provide flatter fit
  • 3/8” accessory mounting holes along both sides
  • Cam band slots for single tank diving w/o the need for a single tank adapter
PART NUMBER DESCRIPTION
HL801
Stainless Steel Backplate

  • 316 stainless steel construction
  • Allows stable mounting of single cylinder to backplate
  • Includes stainless steel mounting hardware
  • 14 gauge material
PART NUMBER DESCRIPTION
HL802
Stainless Steel Single Tank Adapter

  • Milled from solid block of Delrin thermoplastic
  • Creates a strong, durable alternative to traditional wing nuts
  • Knurled gripping surface for easier assembly/disassembly of dive gear
  • Available in two thread sizes – 3/8” and 5/16”
PART NUMBER WHOLE DIAMETER FITS ON
HL407 3/8" Delrin Nuts (Pair) 7.25" Bands
HL408 5/16" Delrin Nuts (Pair) 8" Bands


  • Unique cam band has hoop/buckle feature to allow complete separation of buckle from strap
  • 316 stainless steel buckle has a higher “lift” on the rolling edge to increase force
  • Higher lift causes buckle to “snap” into place eliminating
    unintentional release of the buckle
  • Easy to adjust to different cylinder diameters
PART NUMBER DESCRIPTION
HL201
Tank Bands with Stainless Steel Cam Buckles - (pair)

  • Injection molded cam buckles
  • Nylon with glass filling material
  • Designed to fit 6.9" to 8.0" cylinder diameters
PART NUMBER DESCRIPTION
BP500
Standard Cam Bands (pair)

  • 304 stainless steel Cam buckles
  • Designed to fit 2" diameter webbing
  • Positive cam lock
  • Solid hinge pin
PART NUMBER DESCRIPTION
HL414
Stainless Steel Harness Buckle

  • Precision machined from 316L stainless steel
  • Protects 200 and 300 bar DIN threads
  • Seals water out with Viton o-ring for oxygen compatibility
  • No groove through threads
PART NUMBER DESCRIPTION
HL402
DIN Plug (Stainless Steel)

  • Precision machined from anodized aluminum
  • Protects threads on DIN first stage
  • Seals water out of first stage
  • Attached nylon cord lanyard
PART NUMBER DESCRIPTION
HL401
DIN Cap (Black Aluminum)

  • Can be installed on any 2nd stage and allows instant stopage of airflow through hose
  • Provides complete protection from an octopus free flow while diving
  • Ideal for decompression bottles or stage bottles where preventing gas loss is critical
PART NUMBER DESCRIPTION
HL404
Inline Shut Off - for regulator 2nd stages

  • Install between standard 3/8" male regulator hose fitting and first stage low pressure port
  • Slide machined Delrin collar to shut off gas flow
  • Prevent critical gas loss
  • Most commonly used with rebreather systems
PART NUMBER DESCRIPTION
HL404-38
Inline Shut Off at 1st Stage

  • 420 Grade stainless steel construction
  • Rust resistant titanium coating
  • Cut your way out of most anything
  • 304 Grade stainless steel hinge bolt
  • Red handles
PART NUMBER DESCRIPTION
HL411
Titanium EMT Shears


  • 316 grade stainless steel construction
  • Adjustable length nylon webbing
  • Stainless steel cam buckle
  • Quick detach
  • Designed for 4.4" diameter pony cylinder alum 13, 14, 19
  • Designed for 7.25" diameter primary cylinder
  • Rubber feet to protect paint
PART NUMBER DESCRIPTION
HL409
Stainless Steel Pony Mount

click to see specifications

  • Low pressure 8 cu ft cylinder
  • PRO DIN/Yoke Combo Valve
  • Highland Pony Mount
  • Highland Compact First Stage
  • Mini Tech Gauge
  • DIN Cap
  • Over Pressure Relief Valve
  • 22" EZ Quick-Disconnect Hose
  • Argon Sticker
PART NUMBER DESCRIPTION
HL413
Complete Argon System

  • Compact first stage designed specifically for drysuit inflation
  • DIN 1st stage for low profile attachment
  • Factory I.P. set at 120 psi
  • Includes 22” EZ QD inflation hose
  • Includes Over Pressure Relief Valve (OPV)
  • Includes Delrin DIN cap w/ lanyard to protect threads
  • Includes Mini Tech Gauge (p/n HL501)
PART NUMBER DESCRIPTION
HL405
Includes OPV 22" Hose and Delrin Cap
HL405-KIT
Argon First Stage Service Kit
  • Compact, low profile design
  • Flow-by piston design
  • One high pressure, two low pressure ports
  • Direct attachment to 200 or 300 bar DIN connection
  • Add Spin-On Yoke (p/n AC375) for yoke attachment
  • Includes Delrin DIN Cap w/ lanyard to protect threads
PART NUMBER DESCRIPTION
HL406 Compact DIN 1st Stage
  • Small relief valve to allow regulator to release pressure from 1st stage
  • Pressure will release when intermediate pressure is above 200 psi
  • Fits into standard 3/8" low pressure regulator port
  • Compact size and low profile
  • Stainless steel internal spring
PART NUMBER DESCRIPTION
AC395 Over Pressure Valve

  • Glue-On Attachment to Wetsuits and Drysuits
  • 9 inches Tall x 6 inches Wide x 3 inches Deep
  • Oversized 11 inches x 8 inches 2mm Neoprene Backing
  • 1680 Ballistic Nylon Material
  • Pleated Pocket to Fold Flat when Empty
  • Velcro Tabs Keeps Pocket Flat when not in use
  • (3) 316 Stainless Steel Grommet Drains
  • (2) More SS Grommets for Bungee Loop Installation
  • (2) Interior 316 SS 1” D-Rings Attachment Points
  • Interior Mesh Divider for Wet Notes, etc...
  • Superior Design and Construction
  • AquaSeal™ (1/2 oz Tube) and Application Brush Included
PART NUMBER DESCRIPTION
HL106
Glue-On Thigh Pocket

  • Pull-On Utility Shorts for Scuba Divers
  • Fits Over Wetsuit or Drysuit
  • 2mm Super-Stretch Neoprene
  • Flat-Lock and Double Needle Sewn Construction
  • Nylon Cord Draw String Waist to Prevent Slipping
  • Two Cargo Pocket for Convenient Gear Storage
  • 1680d Ballastic Nylon Material
  • Large Velcro Flap Closure
  • Five 3/4" 316 Stainless Steel Grommets per Pocket
  • Three 1" 316 Stainless Steel D-Rings per Pocket
  • Two 4" Webbing Straps for Gear Attachment per Pocket
  • Interior Mesh Pocket
  • Pocket Held Flat with Velcro Tabs when Empty
  • Pocket Dimensions: 9" H x 6" W x 3" D

 

PART NUMBER WAIST SIZE
HL101-SM Small 25 to 29
HL101-MD Medium 29 to 33
HL101-LG Large 33 to 37
HL101-XL Extra Large 37 to 41



Pressure Gauge

  • Chromed brass housing
  • 0 to 5000 psi (400 bar)
  • Luminescent gauge face
  • Airspool with Viton o-rings
  • 1.96" diameter (50 mm)
  • .55" depth (14 mm)

Depth Gauge

  • Chromed brass housing ring
  • Oil filled
  • 0 to 220 feet (70 m)
  • Luminescent gauge face
  • Maximum depth indicator needle
  • 1.95" diameter (50 mm)
  • .90" depth (23 mm)

Attachment Clips

  • Two loops for attachment

Hose

  • Includes black 32" (82 cm) Miflex high pressure hose
PART NUMBER DESCRIPTION
HL300
Miflex Two Gauge Console
HL300M
Miflex Two Gauge Console - Metric

  • Twice as big – a thousand times easier to read
  • 1.0” diameter gauge face
  • 220º range of needle movement for improved accuracy
  • Viton o-rings for oxygen compatibility
  • Mount to HP port or HP hose w/ included adapter
  • Available in psi or bar
  • Air spool included for hose mount
  • Over-pressure relief built in for added safety
PART NUMBER DESCRIPTION
HL501 Mini Tech SPG - psi

HL501M

Mini Tech SPG - bar
HL403 Adapter Mini Tech Gauge to HP Hose
(Included with HL501)
  • Not included with Mini Tech Gauge
  • Use to mount a Mini Tech Gauge to HP hose
  • Right angle (90º) with the HP hose
  • Airspool with Viton o-rings
PART NUMBER DESCRIPTION
HL403-90 90 Degree Gauge Adapter

  • Compact and thin, high quality pressure gauge
  • Nickel plated brass housing
  • Durable, Lexan lens
  • Ready to mount directly to High Pressure hose
  • Air spool included
  • Oxygen compatible with viton o-rings
  • Wide 240 degree sweep from 0 to 5000 psi
  • Available in psi or bar
  • Bright, white face - easy to read
  • HP hose is not included
PART NUMBER DESCRIPTION
HL304
HL304M
2" Thin-Line SPG
HL305-BK
HL305-GN
Black Boot
Green Boot

  • Compact and thin, high quality pressure gauge
  • Nickel plated brass housing
  • Durable, Lexan lens
  • Ready to mount directly to High Pressure hose
  • Air spool included
  • Oxygen compatible with viton o-rings
  • Wide 270 degree sweep from 0 to 5000 psi
  • Available in psi or bar
  • Bright, white face - easy to read
  • HP hose is not included
PART NUMBER DIAMETER UNITS
HL301 2.0" psi
HL301M 51 mm bar
GP11 Protective Boot - Black
  • Brass housing with glass face cover gives extreme durability
  • Gauge face reads to 5000 psi
  • Triple chrome-plated case
  • Simple unobstructed dial for easy reading
  • Viton o-rings for oxygen compatibility
  • Available in psi or bar
  • HP hoses available in 6” to 42” lengths (see page 93)
  • Hose and gauge boot sold separately
PART NUMBER DIAMETER UNITS
HL302 2.5" psi
HL302M 64 mm bar
GP08 Protective Boot - Black

  • Required swivel between HP hose and SPG
  • Brass construction
  • Oxygen compatible with viton o-rings
PART NUMBER DESCRIPTION
HL303
Airspool w/ Viton O-rings

  • BIG – 10’ long with 22” circumference
  • Large enough to greatly enhance diver visibility yet compact    enough to carry easily
  • 75# surface lift
  • Baffled bottom for anti-spill inflation
  • Oral inflator for surface deployment
  • OPV – overpressure relief valve
  • Three bands of 3M “SOLAS” reflective tape for improved surface visibility
  • Stainless steel D-ring at top for strobe attachment
  • 20” long lift harness with stainless steel D-ring
  • Elastic chemical light stick holder at top
  • Includes 6.5” X 14” mesh carry pouch with grommets for backplate attachment (p/n AC080)
PART NUMBER DESCRIPTION
HL202-OR
10' Surface Marker Buoy (Orange)
HL202-YL
10' Surface Marker Buoy (Yellow)

  • 100 pounds of positive lift
  • "Anti-spill" bottom for easy fill from bottom
  • Combination oral/QD inflator hose inflator
  • Over pressure relief valve/dump valve
  • Lifting strap with stainless steel d-ring
  • Elastic chemical light holder at top
  • Stainless steel d-ring at top for attachment of light or strobe
  • Lifting handle at top
  • Includes 6.5" x 14" mesh carry pouch with grommets for backplate attachment (p/n AC080)
PART NUMBER DESCRIPTION
HL203-OR
HL203-YL
100 lb. Lift Bag
  • Designed for adjusting your trim when using double cylinders
  • Attach with lower cylinder band bolt
  • Two stainless steel grommets for attachment
  • Sealed opening with double Velcro closure
  • Just pour in your lead shot up to 6 lbs.
  • Wide opening allows the use of hard weights up to 5 lbs.
PART NUMBER DESCRIPTION
WB500 Tail Weight Pouch
  • Add trim weight in the center groove of your backplate
  • Attach with twin cylinder band bolts
  • 11" center to center
  • Stainless steel grommets
  • Two mesh compartments; front and back
  • Sealed opening with double Velcro closure
  • Just pour in your lead shot of up to 7 lbs.
PART NUMBER DESCRIPTION
WB550 "V" Weight Pouch

  • Low profile, split lens configuration
  • Ideal for emergency back-up use or as a primary mask
  • Minimal frame coupled with super-soft black silicone
  • Extremely lightweight and comfortable design
  • Buckles molded directly into skirt; allows mask to fold flat
  • Includes “tech style” glue-on pocket
PART NUMBER DESCRIPTION
HL701
Back-Up Mask w/Glue-On Pocket

  • Attaches easily to any regulator 2nd stage mouthpiece
  • Allows regulator to hang close under the chin
  • Keep your air source where you need it
  • Durable, no memory silicone rubber
PART NUMBER DESCRIPTION
HL601BK
Regulator Necklace (Black Silicone)

  • Larger size for divers with "pumpkin" heads
  • Attaches easily to any regulator 2nd stage mouthpiece
  • Allows regulator to hang close under the chin
  • Keep your air source where you need it
  • Durable, no memory silicone rubber
PART NUMBER DESCRIPTION
HL601BK-LG
Regulator Necklace (Large)

  • Available in three lengths
  • Spools are injection molded with glass filled nylon
  • #24 hi-viz yellow nylon line
  • 4" stainless steel doublender bolt snap with 18-8 SS internal springs
PART NUMBER DESCRIPTION
AC475
60' Finger Spool
AC465
100' Finger Spool
AC470
160' Finger Spool

  • Choose 150 ft or the 290 ft line model
  • Stainless steel frame
  • Injection molded Delrin spool
  • #24 hi-viz yellow nylon line
  • Quality 4" stainless steel double-ender with stainless steel springs
  • Quality stainless steel bolt snap
PART NUMBER DESCRIPTION
HL602 150 ft Highland Reels w/ three position switch
HL603 290 ft Highland Reels w/ three position switch

PART NUMBER DESCRIPTION
CH004 4.75" Swivel Bolt Snap - Stainless Steel
HL906 4.75" Swivel Bolt Snap - Stainless Steel
HL913 4.0" "U" Top Swivel Bolt Snap - Stainless Steel
HL905 3.75" Swivel Bolt Snap - Stainless Steel
HL904 2.75" Swivel Bolt Snap - Stainless Steel
HL907 3.5" Butterfly Swivel Bolt Snap - Stainless Steel
HL917 2.0" Webbing Three Bar Slide - Stainless Steel
AC305 2.0" Webbing Weight Keeper - 304 Stainless Steel
AC315 2.0" Webbing Weight Keeper - Black - Molded Delrin
HL903 4.5" Doublender Bolt Snap - 316 Stainless Steel
HL902 4.0" Doublender Bolt Snap - 316 Stainless Steel
HL901 3.5" Doublender Bolt Snap - 316 Stainless Steel
AC305D 2.0" Webbing Weight Keeper with D-Ring - 304SS
HL909 90 Degree Billy Ring - 316 Stainless Steel
HL908 45 Degree Billy Ring - 316 Stainless Steel


Everything for the Perfect Dive

Home | Product Guide | Dealer Locator | Contact Us
Company Profile | Support | Search | Site Map | Dealers Only

©2011 XS Scuba. All rights reserved.